The blade carrier is designed as a cradle for up to 3 lawn mower blades. Its clean and simple design use gravity to allow the blade to lightly jam in the cradle to keep the blade in place, and minimize any rattling noise from vibration during grinding. The Blade Carrier is mounted to the stand with isolation rubber washers to also minimize any noise. The Blade Carrier mounts under the table top of the stand.
The MAG-10400 or MAG-10450 can have as many as 4 blade carriers mounted to its table top. There are holes on the top and bottom of the blade carrier so they can be connected in succession (daisy chain). So it is possible to mount two carriers to the stand table top (each side) then another two connected to those blade carriers.
ALL NECESSARY HARDWARE INCLUDED